3D PLA Red Printing Filament, 1.75 mm Dimensional Accuracy +/- 0.05 mm, 2.2 LBS Spool

June 15, 2019 - Comment

PLA is the best and easiest material for FDM 3d printer. Low smell. NO warp, NO jam, NO burbles, No cracking The best choice for freshmen in 3d printingFeatures: 1 KG (approximately 2.20 lbs.) Spool1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With DesiccantRecommended Extrusion/Nozzle Temperature 180°C – 210°C

Buy Now! $14.59Amazon.com Price
(as of December 6, 2019 3:04 pm AST - Details)

PLA is the best and easiest material for FDM 3d printer.
Low smell. NO warp, NO jam, NO burbles, No cracking
The best choice for freshmen in 3d printing
Features:
1 KG (approximately 2.20 lbs.) Spool
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
Recommended Extrusion/Nozzle Temperature 180°C – 210°C (356°F – 410°F)
Spool Diameter: 7.88″ – Spool Width: 2.69″ – Spool Hub Hole Diameter: 2.20″

Product Features

  • Material: PLA; Color: Red
  • Weight: 1 KG (approximately 2.20 lbs) Spool
  • Diameter: 1.75mm Filament (Dimensional Accuracy +/- 0.03mm)
  • Suggest print temperature:180°C – 210°C (356°F – 410°F)
  • Spool Diameter: 7.88″; Spool Width: 2.69″; Spool Hub Hole Diameter: 2.20″

Comments

Anonymous says:

Good price, not the best filament I really like the way it looks when it finally prints well. I had issues getting it to stick to my bed (I use uncoated, clean smooth glass). I know I could have used hair spray, glue stick, tape, or built tac, but I like the finish of printing on glass.This filament is good though. I would have given it 3 stars had the price been higher. 4 stars seems okay though, it does print well once it gets going. The color is nice, the filament its self has a good steady measurement, and no…

Anonymous says:

WARNING. BETTER HAVE A GOOD EXTRUDER A few things first of all1. The color is more of a magenta. Would not say it’s purple. I do like the color, but it’s not purple2. THIS PLA WAS VERY DIFFICULT TO GET TO PRINT(Using the ender 3) The PLA is harder than other brands, and the extruder teeth had a tough time biting into the filament and feeding it into the extruder. So I had to design a plastic washer in fusion 360 to increase tension on the extruder. I am happy to say it worked and now the print is running…

Anonymous says:

I’m a believer I had a bunch of fails at first and was worried I wasted my money on this product but once I got everything dialed in I feel good about my purchase. I would definitely start with a small test print to make sure everything is working as expected.In order to get to the point where I can recommend this product I had to change the following: I ended up printing about 20% slower than normal, slightly hotter (around 215 C), and I changed my estep by +1.0 so I am extruding a little bit…

Write a comment

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.

The owner of this website, RDI, is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking 3DPrintersHQ.com to Amazon properties including, but not limited to, amazon.com, endless.com, myhabit.com, smallparts.com, or amazonwireless.com. Certain content that appears on this site comes from Amazon Services LLC. This content is provided 'as is' and is subject to change or removal at any time.