3D Warhorse PLA Plus(PLA+) Filament, PLA Plus(PLA+) Filament 1.75mm, Dimensional Accuracy +/- 0.02 mm, 4.4 LBS(2KG), Bonus with 5M PCL Nozzle Cleaning Filament, Black+Blue

July 19, 2019 - Comment

Black PLA+ Filament + Blue PLA+ Filament 1.75 mm, 2 x 1kg,Dimensional Accuracy +/- 0.02 mm,2 Pack(Black PLA+ Filament + Blue PLA+ Filament) ✮✮✮ Filament Features ✮✮✮ Material: PLA+ Printer Filament Color:1kg x Black + 1kg x Blue Net Weight: Filaments total 2KG; 1KG of Each Color Diameter: 1.75mm PLA+ Filament (Dimensional Accuracy +/- 0.02mm)

Buy Now! $32.99Amazon.com Price
(as of December 6, 2019 3:04 pm AST - Details)

Black PLA+ Filament + Blue PLA+ Filament 1.75 mm, 2 x 1kg,Dimensional Accuracy +/- 0.02 mm,2 Pack(Black PLA+ Filament + Blue PLA+ Filament)

✮✮✮ Filament Features ✮✮✮

Material: PLA+ Printer Filament

Color:1kg x Black + 1kg x Blue

Net Weight: Filaments total 2KG; 1KG of Each Color

Diameter: 1.75mm PLA+ Filament (Dimensional Accuracy +/- 0.02mm)

Recommended Extrusion/Nozzle Temperature : 190°C – 230°C (398°F-454°F)

✓100% WORRY-FREE SATISFACTION GUARANTEED

100% worry-free satisfaction guaranteed offered to let you buy with confidence; no questions asked.

So, why think twice?

ORDER NOW ➤ Get this Incredible PLA+ filament 1Kg Spool for 3D printers ➤Delivery in Just 3-5 Days!

Product Features

  • ◆【Bonus Nozzle Cleaning Filament】 Bonus with 5M PCL nozzle cleaning filament. Please clean your 3D printer’s nozzle with it before printing, which will extrude with remains of last print. Guarantee the fluent PLA Plus filament flow while printing in case of nozzle jamming. PCL filament requires: The temperature of last print(e.g. If last print was PLA, then PCL requires 190-220℃. If it was ABS, PCL requires 210-230℃)
  • ◆【+/-0.02mm Tolerance Only】 Minimum Tolerance of PLA plus filament to ensure consistently extruded, no clogging, extremely high successful rate. Extruder temperature: 200-230℃,Heated Bed (Optional): 45-60℃.
  • ◆【Non Toxic & Low Odor】 Ideal PLA plus filament for indoor printing, eco-friendly & no harm for user. Don’t worry to small something bad during usage. All 3D Warhorse PLA plus filament have passed REACH, RoHS, MSDS Certificates.
  • ◆【Guarantee & Service】 365 days warranty, any quality problems about our 3D printer filament, we will replace you another roll free filament.
  • ◆【Why PLA Plus Filament】 PLA plus(PLA+) filament have advantage of high purity, high strength with better toughness, easy to use and no bubble etc. ①High purity of raw material is to avoid extruder clogged and ensure fluent filament flow. ②3D Warhorse PLA plus filament is high strength with better toughness, which is ten times stronger than common PLA, suitable for complex structure 3D artwork with high toughness requirement. ③Good glossiness of filament contributes to realistic printing model.

Comments

Anonymous says:

Quality gold PLA and a very good price Full disclosure, I was offered reimbursement of the cost of a roll of 3d Hero Filament in return for a review though there were no limits/requirements put on me for the review and I would not do it if there were.These are my own honest observations and opinions.The pictured prints used 3d Hero Gold PLA ($18.99/kg) and have had no post processing and were done on an Ender 3 with a .4mm nozzle, .2 mm layer height, 60c bed temp, printing temps from 200c to 220c and print…

Anonymous says:

Good Filament Good Price This filament printed very good. I used my normal pla temp of 220 and did have a little stringing. I lowered the temp to 217 and seemed to fix the stringing. Other then that I had no problems event during a 24 hour print. I used 2 different printers a direct drive modified cr-10 and a bowden modified Anet A8 and printed fine on both printers. The color are very nice. And the finish of the plastic was shiny from both printers. Did have some warping but that was due to bad 1st layer on my part…

Anonymous says:

Very Skin like Color This filament really is skin color…so when I was looking for things to print my wife gave me a suggestion. Well it made the best gag gift a co worker has ever got…..If you have anything needs to be printed in human skin…well look no further.Navarre 3D Printing

Write a comment

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.

The owner of this website, RDI, is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking 3DPrintersHQ.com to Amazon properties including, but not limited to, amazon.com, endless.com, myhabit.com, smallparts.com, or amazonwireless.com. Certain content that appears on this site comes from Amazon Services LLC. This content is provided 'as is' and is subject to change or removal at any time.