AmazonBasics ABS 3D Printer Filament, 1.75mm, 5 Assorted Colors, 1 kg per Spool, 5 Spools

December 8, 2018 - Comment

An Amazon Brand. Product Features 3D printer filament with 1.75 mm diameter + / – .05 mm; designed to fit most common 3D printers (check spool size for compatibility); 5 assorted colors: Black, Red, Gray, Blue, and White; 1 kg per spool (5 spools) Made of commonly used ABS, a strong thermoplastic material-great for creating

Buy Now! $52.87Amazon.com Price
(as of 7:02 am AST - Details)

An Amazon Brand.

Product Features

  • 3D printer filament with 1.75 mm diameter + / – .05 mm; designed to fit most common 3D printers (check spool size for compatibility); 5 assorted colors: Black, Red, Gray, Blue, and White; 1 kg per spool (5 spools)
  • Made of commonly used ABS, a strong thermoplastic material-great for creating durable items that require a higher resistance to heat
  • Spool’s built-in gauge shows percentage of material remaining and approximate length remaining
  • Engineered to reduce jamming; resealable storage bag included to protect filament between use
  • Measures 9.8 by 9.3 by 16 inches (LxWxH); weighs 11 pounds; backed by an AmazonBasics 1-year limited warranty

Comments

Anonymous says:

Absolutely Awesome ABS!! ABS gets a bad rap for warping, but is a really versatile filament when used correctly. I am an ABS fanatic, but i also have a temp controlled case and a temp controlled Acetone case.I have ran so many different brands through my machine and i only like a select few. This stuff prints super smooth, bridges surprisingly well for ABS and has little warp (for ABS). Also the Windows on the side of the spool are super useful, as well as having plenty of slots for securing filament when not in use.

Anonymous says:

Excellent value ABS This ABS prints very well and has produced some fantastic prints for me. It seems very low-hassle, with minimal warping (for abs) and good bed adhesion with pva glue stick. I printed these models in an enclosure with the print cooling fan on a very low setting after layer 3.There is some slight but noticeable inconsistency in the color, like it should have been mixed for just a bit longer, but that is acceptable to me at this price point.

Anonymous says:

Had best luck with fan on :/ Ive only used one other brand of ABS. With that old one I found the standard rules of ABS applied. With this one I had a hard time getting some details to print right. I tried lots of settings, but eventually I turned on the fan in desperation lol….It prints great with 75% fan…I have not determined the ideal temp to use or how the fan will effect layer adhesion, but this ABS is much different than my other. Temp towers showed bad bridging, but solid adhesion all the way down to 230C. I…

Write a comment

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.

The owner of this website, RDI, is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking 3DPrintersHQ.com to Amazon properties including, but not limited to, amazon.com, endless.com, myhabit.com, smallparts.com, or amazonwireless.com. Certain content that appears on this site comes from Amazon Services LLC. This content is provided 'as is' and is subject to change or removal at any time.