Artillery Sidewinder X1 3D Printer, 2019 Newest Model Ultra-Quiet Lattice Glass Heat Bed Aluminum Extrusion Frame & Filament Runout Sensor & Power Failure Recovery 3D Printering, 300x300x400cm

May 21, 2019 - Comment

Special Feature: 1.STRONGER, MORE STABLE SYNCHRONIZED DUAL Z SYSTEM 2.SILENT & FASTER PRINTING SELF DEVELOPED ULTRA-QUIET DRIVER 3.MORE INTELLIGENT POWER FAILURE RECOVERY 4.MORE INTELLIGENT FILAMENT SENSOR, pause the print and ask the user to insert a new spool 5.RAPID HEATING AC HEAT BED 6.MUCH STABLE BRANDED POWER SUPPLY UNIT 7.PRINT WITH PRECISION DIRECT DRIVE EXTRUDER

Buy Now! $439.99Amazon.com Price
(as of December 6, 2019 3:04 pm AST - Details)

Special Feature:
1.STRONGER, MORE STABLE SYNCHRONIZED DUAL Z SYSTEM
2.SILENT & FASTER PRINTING SELF DEVELOPED ULTRA-QUIET DRIVER
3.MORE INTELLIGENT POWER FAILURE RECOVERY
4.MORE INTELLIGENT FILAMENT SENSOR, pause the print and ask the user to insert a new spool
5.RAPID HEATING AC HEAT BED
6.MUCH STABLE BRANDED POWER SUPPLY UNIT
7.PRINT WITH PRECISION DIRECT DRIVE EXTRUDER
8.MORE CONVENIENT LARGE NUT DESIGN
9. A new Lattice glass as 3d printer platform, extremely flat surface, superb adhesion, a breeze to release the printed objects, fast and steady heated curve, tested and durable.

Specification:
Layer Resolution: 0.1mm
Frame: Aluminum Extrusion
XYZ Positioning Accuracy: 0.05mm, 0.05mm, 0.1mm
Printing Filament: PLA, ABS, TPU, Flexible Materials
Filament Diameter: 1.75mm
Nozzle Diameter: 0.4mm
Maximum Print Speed: 150 mm/s
Maximum Travel Speed: 250mm/s
Build Volume: 300x300x400 mm
Extruder Type: Titan Extruder (Direct Drive)
Maximum Build Plate Temperature: 130C
Power Requirement: 110V – 240V, 600W max (with heated bed turned on)
Connectivity: USB, TF Card, USB Stick
Control Board: MKS Gen L
Nozzle Type: Volcano
Machine Dimensions: 550x405x640 mm
550x405x870 mm (with spool holder)
Shipping Box Dimensions: 780x540x250mm
Shipping Weight: 16.5KG

Package Include:
1 x Artillery Sidewinder-X1 3D Printer
1X Assembly tools
1 X Assembly instructions
1 X Assembly Guide

Product Features

  • Exclusive Ultra-Quiet Stepper Driver – Dissipated much less heat and maintaining a higher torque comparing to other quiet stepper drivers available.
  • Synchronized Dual Z System – Make sure both side of the gantry move ups and downs the same height and at the same speed, ensure the X carriage always move parallel to the build plate, even when one of the Z-stepper breaks down.
  • Direct Drive Extruder – With Titan Extruder, it makes your printer more reliable, especially for flexible filaments.
  • AC Heating Platform – For quick heating. A new Lattice glass as 3d printer platform, extremely flat surface, superb adhesion, a breeze to release the printed objects, fast and steady heated curve, tested and durable.
  • Power Failure Protection – Continue printing from the position where the last print was stopped during the power failure, and you can stop the continuous operation or power off.

Comments

Anonymous says:

Fantastic Printer This printer prints beautifully. However, the adhesive on the silicone pad is lackluster and is pulling away from the back right corner (as you look at the printer) due to the weight of the wiring. They need to upgrade to 3M adhesive and strain relief to fix this.

Anonymous says:

Is this really worth buying? Length:: 0:22 Mins No doubt, yes!1.This is the quietest printer I have ever used. It is extremely quiet. Noise does not affect my daily work and life.2.In the picture, I printed the mechanical head, changed the material once in the middle, but still printed very well. Finally, it was a bit rough because I adjusted the printing speed too fast and did not affect the viewing.3.In the film, I also printed a starfish, used to test the accuracy of the…

Anonymous says:

Absolutely great printer! Absolutely great printer! I have purchased/built/used 10 printers now. This is the best one I’ve owned in the 3 years I’ve been 3D printing! I’m not exaggerating when I say this is without a doubt my new favorite 3D printer. I bought this printer from Amazon but another vendor.Thats not to say that it is perfect. No 3D printer is. But Artillery clearly has taken a lot of care to be sure it works very well.This is without a doubt the quietest 3D printer I’ve ever owned…

Write a comment

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.

The owner of this website, RDI, is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking 3DPrintersHQ.com to Amazon properties including, but not limited to, amazon.com, endless.com, myhabit.com, smallparts.com, or amazonwireless.com. Certain content that appears on this site comes from Amazon Services LLC. This content is provided 'as is' and is subject to change or removal at any time.