MK2B Heated Bed with Soldered NTC 3950 Thermistor – 3D Printer PCB Heatbed for MakerBot RepRap UP Mendel I3 Printer

July 10, 2019 - Comment

3D Printer PCB Heatbed Keeping your 3D print warm during the entire process can be the difference between a great final result and a disappointment. This PCB hot bed is designed to keep the material malleable and avoid the edges of your model cooling faster than the interior, which can lead to warping. Improving adhesion

Buy Now! $21.85Amazon.com Price
(as of 7:03 pm AST - Details)

3D Printer PCB Heatbed

Keeping your 3D print warm during the entire process can be the difference between a great final result and a disappointment. This PCB hot bed is designed to keep the material malleable and avoid the edges of your model cooling faster than the interior, which can lead to warping.

Improving adhesion and maintaining a flat base on the print bed, the MK2B hot bed includes a soldered 100K ohm NTC 3950 thermistor and soldered power cord, making this heated bed ready to use.

Featuring red soldermask and white silkscreen on both sides, the 12V or 24V 3D Printer Heated Bed is designed for the MakerBot RepRap UP Mendel I3 Printer, and measures 214mm x 214mm (8.4 in x 8.4 in).

Specifications:

MK2B: 12V or 24V Heated Bed 214mm x 214 mm (8.4 in x 8.4 in) Thermistor included: 100K ohm NTC 3950, soldered and installed Soldered power leads

AMX3d 3D Printing Tools

Great 3D prints start with the best tools. Providing everything you need for truly spectacular results (just like the ones on the 3D printer box!), AMX3d only sell the highest quality 3D print accessories and toolkits, so you won’t be disappointed.

Product Features

  • PCB HEATBED: Keep your print model warm and malleable during the entire printing process for a spectacular final result.
  • PREVENT WARPING:Use the heat bed to improve adhesion – model stays flat on the print bed without corners lifting.
  • COMPATABILITY: MK2B 214mm x 214 mm (8.4 in x 8.4 in) 12V or 24V Hot Bed for MakerBot RepRap UP Mendel I3 Printer.
  • No Soldering Required: The PCB Heat Bed is supplied with integrated 100K ohm NTC 3950 Thermistor and soldered power leads.
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing supplies of the highest quality. If there are any problems with your Heat Bed just let us know!

Comments

Anonymous says:

Perfect replacement bed for the Anet A8 Perfect replacement bed for the Anet A8… haven’t had any problems with it since I installed it several months ago! The only downside I can possibly say about this is that they used excessive soldering on the wires and you cannot lay a sheet of glass over the solder because it’s bubbled up on the printing side. Would have been nicer if the printing surface was completely flat. But it works very well!

Anonymous says:

Nice heated plate…. I would love to give this build plate a 5 star review, as it seems very solid. The solder points on the wires are strong and clean. The build plat itself seems wonderful. plenty of extra wire for the plate and the thermistor. The reason I am leaving just one star is due to the fact that there was NO GLASS SHEET. I ordered this because of the borosilicate glass sheet. The packaging says it should be included, but all that was in the package was the heat plate. The items I did recieve are worth…

Anonymous says:

Works well, happy camper! Came nicely packaged, pre-soldered, glass was flat, and it worked. Wires were well attached (good solder joints), thermister was the expected type and seems to read accurately.Currently the two are clipped together and serve as the only build support. With blue painters tape on the glass, the PLA prints stick almost *too* well… 🙂 (can’t speak to ABS as I don’t use it)Final shot is a 180mm x 180mm x 5mm flat block to test flatness and adhesion for a large object…

Write a comment

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.

The owner of this website, RDI, is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking 3DPrintersHQ.com to Amazon properties including, but not limited to, amazon.com, endless.com, myhabit.com, smallparts.com, or amazonwireless.com. Certain content that appears on this site comes from Amazon Services LLC. This content is provided 'as is' and is subject to change or removal at any time.