Official Creality Open Source CR-10 3D Printer All Metal Frame 12x12x15.5 Inch Build Volume and Heated Bed Includes Glass Bed

April 26, 2019 - Comment

Product Parameter: Printing Size: 300*300*400mm Printing accuracy:±0.1mm Layer thickness: 0.05-0.4mm (adjustable) Nozzle temp: 250 degree Extruder temperature: PLA: 210 Hot bed temperature: PLA: 50 Printing Speed:Normal: 80mm/s, Max.: 200mm/s Materials:1.75mm PLA Working condition temp: 10-30℃, Humidity:20-50% Nozzle: 0.4mm, 0.3mm, 0.2mm Product Features OPEN SOURCE: In the spirit of innovation and progress, we have decided to

Buy Now! $399.00Amazon.com Price
(as of December 6, 2019 3:04 pm AST - Details)

Product Parameter:

Printing Size: 300*300*400mm

Printing accuracy:±0.1mm

Layer thickness: 0.05-0.4mm (adjustable)

Nozzle temp: 250 degree

Extruder temperature: PLA: 210

Hot bed temperature: PLA: 50

Printing Speed:Normal: 80mm/s, Max.: 200mm/s

Materials:1.75mm PLA

Working condition temp: 10-30℃, Humidity:20-50%

Nozzle: 0.4mm, 0.3mm, 0.2mm

Product Features

  • OPEN SOURCE: In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all.
  • EXTRA LARGE: This printer comes with one of the largest build spaces available. At 12inx12inx15.5in, you can print models that 90% of other printers could not. The unique Bowden extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints.
  • HIGH QUALITY: This all aluminum frame provides a sturdy base meant to last for years. The POM engineering thermo-plastic “V-Slot” wheels provide excellent dimensional stability even during extended use. Elimination of metal-on-metal steel rods cuts noise down dramatically.
  • GLASS BED: This printer comes stock with a reliable and flat glass bed. Forget about other printers with uneven printing surfaces and warped beds. This glass bed ensures a 100% usable and flat surface for any print from the smallest test file to the largest model. An absolute necessity when dealing with such a large build space, print from corner to corner and get perfect layer lines every time.
  • OFFICIAL CREALITY: Our experienced 3D printing engineers are available 24/7 to offer you lifetime technical support as well as our 1-Year limited manufacturers warranty. If you are not satisfied with the results of your prints, contact us and we will work with you to provide assistance until you are printing like a pro!

Comments

Anonymous says:

Great printer. Great printer.Works fine out-of-box without any adjustments (only tightened some screws).Pros:- easy setup- good quality- included everything to start printingCons:- some ambiguity how to setup Ultimaker Cura (3d slicing software)- has some issue with bridging, but this is hard to make perfect even for more expensive printers.- instruction from CR-10, not from CR-10 mini, but difference only in sizes

Anonymous says:

I’ve finally found a machine that REMAINS consistently excellent. Aside from the fact that assembly is such … After many attempts, with lesser machines, I’ve finally found a machine that REMAINS consistently excellent. Aside from the fact that assembly is such a breeze (especially after having built the “full kits”), this beauty performs flawlessly, right out of the box. The only other than came close was the Anycubic i3 Mega, but the Anycubic was not able to maintain a consistent level to its bed, despite being smaller (read my review of the physics involved, for further details). The CR10 and…

Anonymous says:

After using several printer. This is the best one yet! I have owned 5 3D printers in all price ranges. I have used 3D printers from $10,000 down to $200. This is one of the best I have ever used. Many products don’t work, the reliability is sub par. This printer, works flawlessly. I know when I start a print, I can know that when I leave i won’t end up with a birds nest of plastic or a warped print, I will have the part I need. I would recommend upgraded the Bowden tube to Capricorn, upgrading the nozzle, and upgrading to the red aluminum feed. If…

Write a comment

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.

The owner of this website, RDI, is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking 3DPrintersHQ.com to Amazon properties including, but not limited to, amazon.com, endless.com, myhabit.com, smallparts.com, or amazonwireless.com. Certain content that appears on this site comes from Amazon Services LLC. This content is provided 'as is' and is subject to change or removal at any time.