SainSmart White Rapid UV 405nm 3D Printer Resin for 3D LCD Printing, General Purpose Photopolymer Curing Resin
Overview SainSmart 3D Resin is a liquid printing material for SLA/LCD printers. Its high precision and cost effectiveness make it a useful material, also beloved by the 3D printing fans. This resin allows you to print a model with extremely fine detail, far more than a standard filament printer can produce, and the end result
SainSmart 3D Resin is a liquid printing material for SLA/LCD printers. Its high precision and cost effectiveness
make it a useful material, also beloved by the 3D printing fans. This resin allows you to print a model
with extremely fine detail, far more than a standard filament printer can produce, and the end result
tends to need far less post-processing work to give you a finished product.
If you are working with SLA/LCD printers, SainSmart Resin will definitely worth trying.
Curing Wavelength: 395nm to 405nm
Hardness (D): 88D
Viscosity (25C, mPa.s): 100 to 150 mPa.s
Density: 1.07 to 1.12 g/cm3
Shrinkage of Vol.: 3.72%-4.24%
Flexural Strength (Mpa): 59Mpa to 70Mpa
Flexural Modulus (Mpa): 1.88 to 2.38
Tensile Strength (Mpa): 35Mpa to 42 Mpa
Elongation at Break (%): 11% to 20%
1) Keep away from light and sealed at room temperature.
2) It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container.
3) Avoid any dusty or moist environment.
Note: Please shake well before use for better prints.
1 x SainSmart Rapid UV 405nm 3D Printer Resin-1000g White
- Rapid UV curing ensures the strength of printing parts and lowers the shrinkage rate. This resin provides you both high toughness and hardness prints.
- The general-purpose resin is compatible with most LCD printers on the market that use 405nm wavelength light. Including EPAX X1, Anycubic Photon, Photon2, WanHao D7, and other LCD printers.
- SainSmart Resin is easy to detach after forming. Low viscosity makes it simple to clean your 3D printer.
- Its performance is stable under room temperature condition and safe to store. Also, with little odor, buy with confidence.
- Great for making functional parts that have high precision and clear details. For better printing quality, we recommend using the LCD light.
The owner of this website, RDI, is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking 3DPrintersHQ.com to Amazon properties including, but not limited to, amazon.com, endless.com, myhabit.com, smallparts.com, or amazonwireless.com. Certain content that appears on this site comes from Amazon Services LLC. This content is provided 'as is' and is subject to change or removal at any time.