SHNITPWR 12V Power Supply 20A 240W AC DC Adapter, 110V / 220V AC to DC 12 Volt 20 Amp Switching Power Converter Transformer LED Driver for LED Light Strip 3D Printer CCTV Security System LCD Monitor
Parameter Input: AC 110V/220V，50/60Hz Output Voltage: DC 12V ( Regulated by 15% ) Output Current: Max 20A Output Wattage:Max 240W Size: 7.87in(L) x 4.33in(W) x 1.96in (H) Material: Metal, Electronic Parts Safety Compliance: FCC / CE/ RoHS / CCC Fix Screw Hole Diameter: 2.5mm (0.1inch) Working temperature: -10°C to 60 °C Environmental humidity: 10%-95% Weight:
Input: AC 110V/220V，50/60Hz
Output Voltage: DC 12V ( Regulated by 15% )
Output Current: Max 20A
Output Wattage:Max 240W
Size: 7.87in(L) x 4.33in(W) x 1.96in (H)
Material: Metal, Electronic Parts
Safety Compliance: FCC / CE/ RoHS / CCC
Fix Screw Hole Diameter: 2.5mm (0.1inch)
Working temperature: -10°C to 60 °C
Environmental humidity: 10%-95%
Weight: 1.43 lb / 650g
1x 12V 20A power supply (power cord is not included)
1.110V/220V must be selected by switch before using to avoid damaging. The power select (110v/220v) switch is located inside the case. Please use a small screw driver to reach in and change the switch to 110V for USA.
2.It comes without installation instruction, power cord, on/off switch and screws. Professional installation of licensed electrician is highly recommended.
3.High voltage inside, NEVER remove the cover. Not waterproof, indoor use only.
4.Make sure your device match the 12V voltage and wattage less than 240W. Please don’t run it overload
5.If there is any issue with the power supply, please feel free to contact us by email. We will solve the problems for you within 24 hours.
L: AC Live Wire
N: AC Neutral wire
COM: DC 12V-
+V ADJ: Adjust output voltage by 15%
Professional advice from licensed electrician:
The max use should be no more than 80% of the full loads.
Otherwise, the service life of the power supply will be greatly shortened.
We recommend you to use this 12V 20A 240W power supply to power devices less than 192W.
- Universal switching mode power supply. Input: AC 110V / 220V, 50 / 60Hz ; Output: DC 12V, Max 20A, 240W. The default output voltage is 12V DC, but it can be regulated by 15%, from 10.2V to 13.8V. Three sets of output channels available.
- It can supply with all amperage less than 20A. —such as 1A, 2.5A, 10A, 12A, 18A, 20A. For example, if your device draws 15A, then 15A will be supplied. If draws more than 20A, only 20A will be supplied and power supply will be damaged soon. NEVER OVERLOAD!
- Certified by FCC CE ROHS. We focus on producing high quality power adapters. No noise, low temperature operation, no spontaneous combustion, no explosion, no fire hazard, stable output. Automatic overload cut-off, over voltage cut-off, automatic thermal cut-off, short circuit protection.
- It is perfect for 5050 3528 12V LED Strip Light, Wireless Router, ADSL Cats, HUB, Security Cameras, Audio/ Video Power Supply, 3D Printer, LED Driver, CCTV Security System, LCD Monitor, Webcam Router and other 12V devices less than 240W.
- There is no built-in fan, silent running. Metal case with many holes makes heat dissipation more efficient. It comes without any power cord. 30 days money back guarantee, 24 months exchange. If there is any issue, please feel free to contact us. We will happily accept the return and give you refund. Email: [email protected]
The owner of this website, RDI, is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking 3DPrintersHQ.com to Amazon properties including, but not limited to, amazon.com, endless.com, myhabit.com, smallparts.com, or amazonwireless.com. Certain content that appears on this site comes from Amazon Services LLC. This content is provided 'as is' and is subject to change or removal at any time.